Waterproof Anti Skid Tape
 | Waterproof Anti Skid Tape
|
Product Description
Detectable Safe Company is a manufacturer of waterproof anti skid tape for wet entrances, outdoor stairs, pool areas, boat decks, ramps, and other walking surfaces exposed to rainwater, splash water, cleaning moisture, or wet shoes. It uses a waterproof backing, abrasive grip surface, and pressure-sensitive adhesive for dry-bonding installation. After 24h dry dwell and edge sealing, reference samples can be checked through 24-72h water exposure observation. It is not intended for untested long-term underwater immersion.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product type | Waterproof anti-skid grip tape for wet-area walking surfaces |
Backing | Waterproof PVC or polymer film backing |
Total thickness | Typical/reference 0.75-1.20 mm, depending on grit and backing |
Grit surface | Aluminum oxide or mineral abrasive texture, medium or coarse option |
Adhesive type | Pressure-sensitive adhesive for dry bonding application |
Standard width | 25 mm, 50 mm, 100 mm, custom slit width available |
180-degree peel adhesion | Typical/reference 8-14 N/25 mm on clean stainless steel before water exposure |
Water resistance sample condition | 24-72h water exposure observation after 24h dry dwell and edge sealing |
Adhesion after water exposure | Reference sample check: no obvious edge lift after proper dry bonding and edge sealing; result depends on substrate |
Service temperature | Typical/reference -10 C to +50 C |
Edge sealing advice | Recommended for wet entrances, outdoor stairs, pool borders, boat decks, and ramps |
Substrate compatibility | Sealed concrete, ceramic tile, painted metal, fiberglass, PVC, sealed wood; sample test required |
Surface preparation | Clean, degrease, remove dust, rinse if needed, and fully dry before bonding |
Water use limitation | Not recommended for long-term underwater immersion or moisture-seepage surfaces without project testing |
Benefits
- Helps improve grip at wet entrances where shoes bring rainwater indoors.
- Works as water resistant stair tread tape for outdoor steps exposed to rain and cleaning water.
- Waterproof backing supports splash-water resistance after clean, dry bonding.
- Rounded corner cutting helps reduce early lifting on stairs, ramps, and poolside strips.
- A 10-15 mm setback from exposed stair or ramp edges is recommended.
- Edge sealing is recommended for wet entrances, pool borders, boat decks, outdoor stairs, and ramps.
- Custom slit rolls and pre-cut strips support stair treads, walkway lines, ramp zones, and marine access areas.
Where should waterproof anti skid tape be used when water is present but not permanently submerged?
Waterproof anti skid tape works best on solid surfaces where water appears from rain, splash, wet footwear, or routine cleaning, but does not stay trapped under the tape for long periods. Common locations include wet entrance thresholds, outdoor stair treads, poolside walking paths, boat deck steps, marina walkways, loading ramps, and service platforms. For pool borders and changing-room entrances, poolside non slip tape should be applied only after the surface is cleaned, dried, pressed firmly, and edge sealed. On stairs and ramps, rounded corners and a 10-15 mm edge setback help reduce premature lifting.
Applications
- Wet entrance zones in commercial buildings, workshops, public access areas, and service corridors.
- Outdoor stairs exposed to rain, mist, cleaning water, or wet shoe traffic.
- Poolside walkways, changing-room entrances, and splash zones after dry bonding and edge sealing.
- Boat deck steps, marina walkways, dock edges, and marine service platforms where marine deck grip tape helps improve wet-foot traction.
- Loading ramps, access ramps, and service ramps where ramp safety grip tape is placed across the walking direction.
- Sealed concrete, ceramic tile, painted metal, fiberglass, PVC, and sealed wood after compatibility testing.
Product Overview
This wet area anti slip tape is made for surfaces that meet water often but should not stay submerged. Typical use includes entrance thresholds, outdoor steps, poolside access paths, boat deck steps, and ramp zones. Compared with ordinary dry-area self adhesive tape, the key checks are wet-foot grip, surface preparation, edge hold, and adhesion after water exposure.
The waterproof backing helps resist moisture from above, while the mineral grit surface adds traction on sealed and stable substrates. The adhesive side still needs a clean, degreased, and fully dry bonding surface. Dust, cleaner residue, oil, wax, loose paint, and moisture seepage may weaken adhesion. As a typical/reference check, 180-degree peel adhesion may reach 8-14 N/25 mm on clean stainless steel before water exposure. Final results depend on substrate condition, bonding pressure, 24h dwell time, and edge sealing.
How should the surface be prepared before bonding waterproof anti skid tape in wet-area projects?
Before bonding, the surface must be dry, solid, and free from oil, detergent residue, dust, rust, loose coating, or water seepage. Smooth sealed surfaces usually need cleaning and degreasing. Porous or worn concrete may need sealing or priming before testing. After application, firm roller pressure should be used along the full strip, especially around edges and corners. For wet entrances, ramps, pool borders, and boat decks, edge sealing should be applied after placement and allowed to cure before heavy water exposure. Do not install the tape onto a wet surface or describe it as suitable for permanent underwater use unless the project has passed its own immersion test.
FAQ
Can waterproof anti skid tape be used around pool areas?
Yes. Clean and dry the surface first, then bond firmly and edge seal. A 24-72h water exposure observation is recommended before wider installation.
Can it be applied directly onto a wet floor?
No. The backing is water resistant after installation, but the adhesive must be applied to a clean and dry surface.
Is edge sealing necessary?
For wet entrances, outdoor stairs, boat decks, ramps, and pool borders, edge sealing is recommended to reduce water and dirt entry.
Which surfaces should be tested before installation?
Sealed concrete, ceramic tile, painted metal, fiberglass, PVC, and sealed wood should be sample tested for adhesion, edge lift, and residue risk.