Danger Confined Space Tape
 | Danger Confined Space Tape
|
Product Description
Detectable Safe Company is a manufacturer of danger confined space tape for temporary entry-control marking around tanks, pits, manholes, silos, tunnels, vaults, and maintenance openings. The tape is supplied as a non-adhesive barricade roll with clear Danger Confined Space / Do Not Enter printing, helping site teams mark restricted access points before inspection, cleaning, repair, ventilation setup, or permit review. PE and reinforced PP versions are available for indoor and outdoor industrial use.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product Type | Non-adhesive confined-space barricade tape |
Main Print | Danger Confined Space / Do Not Enter |
Material Options | PE, LDPE, or reinforced PP |
Common Width | 3 inch / 75 mm |
Common Roll Length | 500 ft or 1000 ft |
Reference Thickness | 3 mil and 4 mil PE, 5 mil reinforced option |
Print Style | Repeating high-visibility warning text |
Reference Text Height | 2 inch warning text available |
Color Format | Red/white/black or yellow/black by request |
Fixing Method | Tie, staple, nail, or attach to post, cone, rail, or barrier frame |
Use Condition | Indoor and outdoor temporary perimeter marking |
Readability Check | Visual print contrast checked from approach direction |
Temporary Observation | 24-72 hour reference perimeter readability check |
Roll Quality | Self-wound roll, clean slit edge, even winding |
Custom Options | Message, language, thickness, length, packing format |
Sample Verification | Recommended around actual confined-space entry points before bulk use |
Product Overview
This tape is made for one specific job: helping teams mark a confined-space entry point before authorized work begins. It is not a general warning roll for every hazard. The printed message is direct, so a tank hatch, manhole rim, silo access door, vault cover, tunnel entrance, pump pit, or temporary maintenance opening is clearly treated as a controlled access area.
For short-term indoor or covered work, 3 mil or 4 mil PE tape is light, quick to pull out, and easy to tie around posts, rails, cones, or temporary barrier frames. For outdoor locations, airflow near openings, repeated shift handling, or longer maintenance periods, a 5 mil reinforced PP option gives better resistance when the tape is pulled, re-tied, or exposed to wind.
During typical reference checks, the roll should unwind smoothly, the slit edge should not tear easily, and the print should remain readable from the worker approach direction. A 2 inch warning text height and repeated print layout can be selected when larger visual recognition is needed near floor-level openings, access ladders, or wide plant walkways.
Benefits
- Helps create a clear temporary confined space barrier before entry-related work starts.
- Danger Confined Space / Do Not Enter wording is more specific than plain red warning tape.
- 3 inch / 75 mm width gives enough space for readable repeated warning text.
- 500 ft rolls suit compact entry points, while 1000 ft rolls reduce roll changes during wider shutdown areas.
- PE tape is practical for quick temporary marking around tanks, pits, manholes, and similar openings.
- Reinforced PP tape is better for wind movement, pulling, longer work duration, and repeated handling.
- High-contrast printing improves recognition near ladders, rails, hatches, and floor-level access points.
- Even winding and clean slit edges help the tape unroll without twisting or tearing during setup.
Applications
- Marking tank hatches before inspection, cleaning, ventilation, or maintenance preparation.
- Setting a do not enter barricade tape boundary around manholes and utility vaults.
- Creating a permit required entry tape reminder near silo doors, pit openings, and access ladders.
- Separating tunnel entrances, pump pits, and temporary maintenance openings from normal walking paths.
- Supporting industrial confined space barricade setup during plant shutdown, repair, or contractor work.
- Using 500 ft rolls for compact entry points and 1000 ft rolls for larger temporary perimeter layouts.
- Selecting reinforced tape outdoors where wind, pulling, or longer setup time is expected.
When should danger confined space tape be set up around an entry point?
This tape should be set up before inspection, cleaning, repair, ventilation preparation, or entry-permit review begins. In a typical/reference 24-72 hour temporary perimeter observation, the tape should stay readable, properly tensioned, and facing the main approach path. Site teams usually place it around tanks, pits, manholes, silos, tunnels, vaults, and maintenance openings to remind workers that entry is controlled. The tape is a temporary visual warning barrier and does not replace entry permits, atmospheric testing, attendants, rescue planning, lockout-tagout, or rigid barriers where required.
Packaging and container loading
How can PE or reinforced tape improve confined-space entry control?
PE tape works well when the boundary needs to be installed quickly, removed cleanly, and used as a lightweight visual reminder. Reinforced PP tape is the stronger choice when the perimeter may be pulled, re-tied, or exposed to airflow near outdoor tanks, open manholes, vault entrances, or tunnel access points. Before bulk use, teams usually compare roll length, material thickness, print readability, winding quality, slit-edge cleanliness, warning text height, and whether the printed message matches the site’s confined-space entry wording. Sample rolls should be checked at the actual entry point to confirm visibility, fixing method, and tension stability.
FAQ
Is this tape adhesive?
No. It is normally supplied as non-adhesive barricade tape for tying, stapling, nailing, or fixing to temporary supports.
Can the wording be customized?
Yes. Custom wording, language, color format, roll length, thickness, and packing format can be produced according to project requirements.
Which material should be selected?
PE is suitable for routine temporary marking. Reinforced PP is better for wind, repeated handling, or longer setup time.
What should be checked before bulk use?
Check print readability, roll winding, slit-edge cleanliness, fixing method, and 24-72 hour temporary perimeter visibility around the actual confined-space entry point.