Glow In The Dark Safety Signs Vinyl Film
 | Glow In The Dark Safety Signs Vinyl Film
|
Product Description
Detectable Safe Company is a manufacturer of glow in the dark safety signs vinyl film for finished safety signs, exit signs, emergency labels, and evacuation route marking panels. This self adhesive luminous vinyl combines a stable vinyl face, photoluminescent layer, pressure-sensitive adhesive, and smooth-release liner, helping sign makers cut, mount, and laminate finished signs with fewer edge and peeling issues. It is made for clean cutting size control, reliable board bonding, and visible afterglow support in corridors, stairwells, equipment rooms, and emergency route areas.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product type | Self adhesive photoluminescent safety sign vinyl |
Main use | Finished safety signs, exit signs, emergency labels, evacuation route marking panels |
Face material | Flexible vinyl face with photoluminescent coating layer |
Surface color | Light yellow-green in daylight |
Afterglow color | Green afterglow |
Total thickness | 280-360 um reference range |
Adhesive type | Permanent pressure-sensitive adhesive |
Release liner | Silicone coated paper liner |
Standard roll size | 1.22 m x 45.7 m |
Custom cutting size | Sheets, labels, arrows, route strips, sign face panels |
Width tolerance | +/- 1 mm reference value |
Cutting tolerance | +/- 0.5 mm for regular converted parts |
Reference charging condition | 1000 lux white light for 10 minutes |
Luminance after 10 minutes | About 145 mcd/m2 reference value |
Luminance after 60 minutes | About 20 mcd/m2 reference value |
Afterglow observation | More than 8 hours in dark room reference test |
Peel adhesion on PVC board | 12-16 N/25 mm after 24 hour dwell |
Peel adhesion on painted metal | 10-14 N/25 mm after 24 hour dwell |
Liner release force | 20-35 g/25 mm reference value |
Application temperature | 10 C to 35 C |
Service temperature | -20 C to 70 C |
Board lamination result | Flat surface with no obvious bubbles after roller pressure |
Edge lifting observation | No obvious lifting after 24-72 hours on clean smooth boards |
Conversion method | Print/cut conversion, kiss cutting, sheet cutting, board lamination |
Suggested verification | Test adhesive, lighting, overlamination, and local code requirements before bulk use |
Benefits
- Converts one roll material into finished safety signs, exit signs, emergency labels, and evacuation route markers.
- Stable vinyl face helps reduce wrinkling during cutting, mounting, and laminated sign panel production.
- Smooth adhesive liner release supports batch work where repeated peeling and board placement are required.
- Typical cutting tolerance can be controlled around +/- 0.5 mm for regular labels, arrows, and sign face pieces.
- Reference peel adhesion reached 12-16 N/25 mm on PVC board and 10-14 N/25 mm on painted metal after 24 hour dwell.
- Suitable for emergency label vinyl face production where low-light visibility and clean sign appearance both matter.
- Helps converters make evacuation route marking material for corridors, stairwells, exit doors, and low-location guidance panels.
- Protective overlamination can be tested for high-touch areas where abrasion, cleaning, or edge wear may affect finished signs.
What should be checked before converting the vinyl face into finished safety signs?
Before conversion, the vinyl face should be checked against the finished sign format, not only the roll specification. For exit signs, emergency labels, directional arrows, and evacuation route marking panels, details such as cutting size, graphic margin, adhesive liner release, and board surface cleanliness can affect the final result. Smooth PVC board, aluminum composite panel, painted metal, and rigid safety sign substrates should be tested before bulk lamination. A small sample run can confirm edge lifting after 24-72 hours, liner peeling stability, cutting accuracy, and afterglow visibility under the lighting conditions found in corridors, stairwells, equipment rooms, and emergency exit areas.
Product Overview
This glow in the dark safety signs vinyl film is built for finished safety sign production, not decorative stickers or general glow material. As an exit sign face material, the vinyl surface can be converted into exit text, directional arrows, emergency equipment labels, low-location route strips, and laminated sign board faces. The roll format is practical for workshops that need repeatable cutting sizes, smooth liner peeling, and stable mounting onto rigid panels.
In typical reference testing, samples charged under 1000 lux white light for 10 minutes showed visible afterglow support for more than 8 hours in a dark room observation. Reference luminance values can reach about 145 mcd/m2 after 10 minutes and 20 mcd/m2 after 60 minutes, depending on pigment grade, charging light, and final sign construction. For real projects, these values should be checked under the actual corridor, stairwell, warehouse, or equipment room lighting conditions.
The adhesive and liner matter as much as the luminous surface. In sample lamination checks, the liner released steadily without tearing, while the vinyl face stayed flat during mounting onto PVC board, aluminum composite panel, painted metal, and rigid safety sign board. After 24-72 hours on clean smooth boards, no obvious edge lifting was observed in indoor reference checks. For signs exposed to frequent cleaning or hand contact, a compatible protective overlamination can be tested to reduce abrasion and edge wear.
Applications
- Exit signs for corridors, stairwells, warehouses, hotels, cinemas, hospitals, and public buildings.
- Fire extinguisher location labels, alarm point labels, first aid station signs, and emergency equipment identifiers.
- Evacuation route arrows, low-location route strips, emergency map markers, and door direction labels.
- Safety signs laminated onto PVC board, aluminum composite panel, painted metal, or rigid sign board.
- Equipment room labels where power loss or low lighting may reduce normal sign visibility.
- Cut-to-size safety panels made with photoluminescent safety sign vinyl for facility marking projects.
- Warning panels and route markers used in stairwells, service corridors, industrial workshops, and building exits.
How does sign board lamination support safety signs and emergency labels?
Sign board lamination turns a roll-format vinyl face into a more stable finished safety sign. After the graphics are produced and cut to size, the luminous face can be mounted onto rigid boards for exit signs, fire equipment labels, evacuation route markers, and low-location guidance panels. In reference lamination checks, clean PVC board and aluminum composite panel showed flat bonding after roller pressure, while poor surface cleaning increased the risk of edge lifting. For high-touch or longer-use areas, a compatible protective layer may help reduce abrasion, cleaning damage, and edge wear. The best result comes from matching the adhesive liner, board surface, cutting size, lighting condition, and installation environment before bulk production.
FAQ
Q1: Is this material mainly for finished safety signs?
Yes. It is designed as an exit sign face material and emergency label vinyl face for safety sign converters, not as a general decorative glow product.
Q2: Can it be laminated onto rigid sign boards?
Yes. It can be laminated onto smooth PVC board, aluminum composite panel, painted metal, and other clean rigid boards after sample testing for adhesion, flatness, and edge stability.
Q3: Does it replace powered emergency lighting?
No. It supports low-light recognition, but project requirements should still be checked against local fire codes, building codes, and safety regulations.
Q4: What should be tested before bulk production?
Test afterglow visibility, adhesive bonding, liner release, cutting size, edge lifting after 24-72 hours, board lamination, and any protective overlamination under real site lighting conditions.