Anti Slip Tape For Swimming Pools
 | Anti Slip Tape For Swimming Pools
|
Product Description
Detectable Safe Company is the manufacturer of anti slip tape for swimming pools, made for wet walking areas where bare feet, splash water, drainage flow, and regular cleaning all affect safety performance. This wet area anti slip tape is suitable for pool steps, poolside wet zones, shower rooms, changing rooms, spa areas, and similar surfaces that can become slippery after water exposure. The tape uses a barefoot-friendly embossed surface and waterproof acrylic adhesive, offering practical traction without the rough feel of aggressive mineral grit.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product Type | Wet-area anti slip tape for swimming pools |
Surface Material | Embossed PVC or PEVA textured film |
Adhesive Type | Waterproof acrylic pressure-sensitive adhesive |
Total Thickness | 0.55 - 0.70 mm typical factory test range |
Surface Texture | Soft embossed, barefoot-friendly, non-abrasive feel |
Common Width | 25 mm, 50 mm, 75 mm, 100 mm |
Roll Length | 5 m, 10 m, 18.3 m, custom length available |
Color | Clear, white, grey, black, blue, custom color |
Peel Adhesion | 12 - 18 N/25 mm typical reference value |
Holding Power | Greater than 24 h at 23 C under factory test condition |
Dry Slip Resistance Reference | COF 0.75 - 0.95 typical reference value |
Wet Slip Resistance Reference | COF 0.45 - 0.65 typical reference value |
Application Temperature | 10 C - 40 C recommended |
Service Temperature | -10 C - 60 C typical use range |
Recommended Surface | Clean, dry, smooth tile, fiberglass, sealed concrete, metal, or coated surface |
Curing Time Before Wet Use | 24 - 48 h recommended before heavy wet cleaning |
Slitting Tolerance | +/- 1 mm typical factory range |
Edge Treatment | Rounded corners and edge sealing recommended for splash-prone zones |
Sample Test | Required before bulk use on textured, coated, or frequently washed surfaces |
Limitation | Not recommended for direct underwater installation or continuous submerged use |
Applications
- Swimming pool steps where bare feet need better traction during entry and exit
- Poolside wet walking areas exposed to splash water and drainage flow
- Shower entries, wash zones, and wet transition points in pool facilities
- Changing room and locker room walkways where soap film or standing moisture may remain
- Spa areas, wellness centers, waterparks, and commercial wet zones
- Smooth tile, fiberglass, sealed concrete, and coated surfaces after sample testing
- Facilities that need consistent 25 mm, 50 mm, 75 mm, or 100 mm rolls for repeated wet-area installation
What Should Be Checked Before Applying Anti Slip Tape in Pool and Wet Areas?
Before applying anti slip tape for swimming pools, the surface should be checked more carefully than a normal indoor dry surface. Pool steps, tile edges, shower room floors, and changing room walkways often look clean but may still hold sunscreen residue, soap film, mineral scale, or traces of cleaning chemicals. These small residues can weaken adhesive contact and increase the chance of edge lifting. The surface should be cleaned thoroughly, dried fully, and confirmed stable before installation. For commercial wet areas, a small sample test is useful before bulk use, especially on textured tile, fiberglass, sealed concrete, or frequently washed drainage zones. During testing, observe whether the tape edge stays flat after wet cleaning and whether the adhesive reaches firm contact after 24 - 48 h of curing.
Product Overview
Swimming pool and wet-area surfaces need more careful product selection than normal dry walkways. Pool steps, tile edges, shower entries, and changing room floors often collect sunscreen residue, soap film, mineral scale, moisture, or cleaning chemical traces. If these residues remain on the surface, even a strong adhesive may not reach full contact. For this reason, the tape should be installed only after the surface is cleaned, dried, and checked for loose coating, unstable paint, or surface dust.
The surface is designed with a soft embossed texture instead of sharp coarse grit. This makes it more suitable for barefoot traffic in pool facilities, showers, and changing areas, while still giving the foot a clearer gripping feel on wet surfaces. In typical sample testing, dry slip-resistance reference values are around COF 0.75 - 0.95, while wet reference values are around COF 0.45 - 0.65. These figures are useful for comparison, but actual performance should always be checked on the real surface.
As a manufacturer, Detectable Safe Company can supply standard rolls, custom slitting, and project roll lengths for commercial wet-area installation. Common widths such as 25 mm, 50 mm, 75 mm, and 100 mm can be selected according to pool step depth, tile layout, and walkway width. For wet transitions and pool step edges, rounded corners and firm pressure from the center toward the edges help the adhesive settle more evenly. In splash-prone or frequently washed zones, edge sealing is recommended to reduce water entry at the tape perimeter.
Benefits
- Made for wet walking areas where splash water, drainage, and regular cleaning are expected
- Barefoot-friendly embossed texture feels less harsh than coarse mineral grit tape
- Waterproof acrylic adhesive supports wet-area use after clean, dry application and curing
- Typical total thickness of 0.55 - 0.70 mm balances grip, flexibility, and edge control
- Helps improve footing on pool steps, poolside wet areas, shower entries, and changing room walkways
- Clear and light color options can reduce visual impact on finished tile or poolside surfaces
- Roll format allows on-site cutting for step edges, pool entry points, and narrow wet transitions
- +/- 1 mm typical slitting tolerance supports repeated-width installation for commercial projects
- Rounded corners help reduce corner lifting during wet cleaning and frequent foot traffic
- Sample observation shows better edge stability when the tape is pressed firmly with a roller
- Edge sealing is useful where water may run along grout lines, drainage slopes, or step edges
How Does Edge Sealing Improve Wet-Area Anti Slip Tape Performance?
Edge sealing helps protect wet-area anti slip tape from water entry at the perimeter, which is often where lifting begins first. Around pools, showers, and changing rooms, water does not simply sit on the tape surface. It may move along grout lines, follow drainage slopes, or remain near step edges after cleaning. After installation, the tape should be pressed firmly from the center outward so trapped air is reduced and the adhesive contacts the surface evenly. Edge sealing is especially useful for pool steps, high-traffic wet walkways, and areas that receive regular washing. It does not replace dry installation, but it can improve edge performance in splash-prone zones.
FAQ
Can this tape be applied directly underwater?
No. The surface should be clean and dry during installation. The tape is designed for wet-area use after proper application and curing, not for direct underwater installation.
Is the surface comfortable for bare feet?
Yes. The embossed surface is designed to feel more barefoot-friendly than aggressive grit tape, making it suitable for pool steps, showers, and changing rooms.
How long should the tape cure before wet use?
A curing period of 24 - 48 h is recommended before heavy water exposure or wet cleaning, depending on surface condition and temperature.
Should samples be tested before bulk installation?
Yes. Sample testing is recommended on tile, fiberglass, sealed concrete, coated floors, or any area exposed to frequent washing and drainage flow.